Schleuniger StripCrimp 200

Get to know one of the most flexible stripper-crimper machines: The fully programmable StripCrimp 200. This machine is most suitable for high precision stripping and subsequent crimping of side- or rear-feed terminals for wires between 0.05 – 4.00 mm² (30 – 12 AWG). The strip and crimp machine, StripCrimp 200, captivates with great flexibility and user-friendly operation. The machine is highly suitable as a semi-automatic stripper-crimper or within fully automatic transfer systems and runs quickly, quietly and safely.

 

  • Fully programmable stripping unit with wayback and recut function
  • Economical & user-friendly
  • Quick-release applicator base plate for easy changeover
  • Job memory for all cable parameters and functions
  • Split cycle capability for closed barrel contacts

The programmable StripCrimp 200 is designed for high precision stripping and crimping of side- or rear-feed terminals for wires between 0.05 – 4.00 mm² (30 – 12 AWG).’

 

Processing Capabilities

 

Discrete wire stripping and crimping

 

Multi-conductor cable crimping

 

Multi-conductor cable stripping

 

Multi-conductor cable stripping and crimping

 

Conductor Cross-Section 0.05 – 4.0 mm² (30 – 12 AWG)
Raw Material Diameter Up to 6.3 mm ( 0.25”)
Crimping Force 33 kN (3.7 tons)
Stroke 40 mm (1.575”)
Shut Height 135.788 mm (5.3460”)
Crimp Height Adjustment ± 0.25 mm (0.01”), in increments of 0.025 mm (0.001”)
Strip Length 0.5 – 15 mm (0.02” – 0.59”)
Wayback Programmable, 0 – 2 mm (0 – 0.08″)
Recut 0 – 4 mm (0 – 0.157”)
Breakout Minimum 19 mm (0.75″) application dependent (for jacketed cables)
Cycle Time  < 0.9 s for stripping and crimping
Crimp cycle time programmable from 350 ms to 1 s
Clamping Clamping force adjustable with pneumatic pressure regulator
Memory Capacity 100
Noise Level <70 dB (A)
Power Rating 0.75 kW
Power Supply 115 VAC – 230 VAC, 50/60 Hz
Dimensions (L x W x H) 350 x 350 x 710 mm (13.8 x 13.8 x 28.0”)
Weight 90 kg (198 lbs.)
CE-Conformity The StripCrimp 200 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Options

  • Pneumatic valve to activate pneumatic crimp applicators
  • Crimp force monitoring
  • Short outer jacket stripping kit (assembled on UNI-A crimp applicator)
  • Carrier strip cutter
  • Terminal oiler
  • Paper winder
  • Work light

Features

All stripping parameters and special functions can be programmed and saved:

  • Wire cross section, correction value, wayback, recut, stripping length, stripping position, multi-step-stripping, press speed
  • Counter function, language, unit of measurement, CFM activation, pneumatic terminal feed, operating mode (only stripping, only crimping, stripping and crimping), password, diagnostic function
  • Active slug removal
  • Quick-change applicator base plate
  • Jogging function (left/right) with home position display and automatic home position function
  • Fine adjustment of crimp height (micro-adjustment)

Visit here to download.