Schleuniger SemiRigid 1050

Programmable stripping machine for semi-rigid coaxial cables up to 4.50 mm (0.177”) outer diameter and strip lengths up to 30 mm (1.18”).

  • High precision, field proven mechanics based on the previous model SemiRigid 1000
  • User-friendly high resolution 7” color touchscreen
  • Intuitive and easy programming thanks to the excellent menu navigation and predefined cable stripping templates
  • Helpful wizards for machine setup and maintenance
  • Appealing design and ergonomics

Semi-rigid coaxial cables from 0.86 (0.034”) up to 4.50 mm (0.177”) outer diameter and strip lengths from 0.10 (0.004”) up to 30 mm (1.18”).

 

Processing Capabilities

Conformable cable processing
Full strip
Pointing of inner conductor
Semi-rigid cable processing
Raw Material Diameter Max. 4.50 mm (0.177“)
Min. 0.86 mm (0.034“)
Strip Length Maximum 30 mm (1.18“)
Increment Length: 0.01 mm (0.00039“) steps
Diameter: 0.01 mm (0.00039“) steps
Blade For turning and removing: 2 pcs.
For turning: 2 pcs. (1 each)
For pointing: 1 set (4 pcs.)
Cycle Rate > 3 s, (depending upon cable type and programming)
Memory Capacity 1,000 cables
Interfaces 2x USB “Host”, Footpedal, Ethernet (on request)
Noise Level  < 70 db (A)
Power Supply 100/115 VAC, 230/240 VAC, 150 VA, 50/60 Hz
Compressed Air Connection 6 bar / 0.6 MPa / 87 psi
Dimensions (L x W x H) 566 x 215 x 252 mm (22.3 x 8.5 x 9.9“)
Weight Net 19.5 kg (43 lbs)
CE-Conformity The SemiRigid 1050 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

Visit here to download.