Schleuniger CrimpCenter 36 SP

[/qode_content_slider_item]

The CrimpCenter 36 SP offers decreased set-up time and increased effective performance. Therefore, overall productivity is increased and jobs can be processed in less time. Furthermore, new features improve quality by systematic optimization, automating previously manual processes and enhancing wire handling. The end result is that the CrimpCenter 36 SP will help you achieve your targets in less time while decreasing cost-per-lead.

  • Optimized default parameter settings
  • A newly developed deposit gripper system
  • Improved synchronization of the feeding unit and conveyor
  • Increased feeding speed from 8 m/s to 10 m/s
  • Additional wire guides at the machine entrance
  • Improved wire straighteners
  • Automatic pressure adjustment
  • Automatic slider tray

The CrimpCenter 36 SP processes wires from 0.13 mm² to 6 mm² (26 AWG – 10 AWG) and features all of the latest quality assurance options such as SmartDetect, WireCam and the Guided Feasibility Study. These features, along with the attractive price point, make the CrimpCenter 36 SP an excellent machine for complex and high precision production with high quality targets.

Material

  • Single Wire

 

Processing Capabilities

 

Crimp/crimp (different terminals)

 

Crimp/crimp (same terminals)

 

Crimp/seal (different terminals)

 

Crimp to crimp

 

Crimp to crimp (closed barrel)

 

Crimp to twist/tin

 

Hard shell/mini seals

 

Printing and marking

 

Seal/seal (same terminals and seals)

 

Seal to crimp

 

Seal to seal

 

Seal to twist/tin

 

Twist/tin both ends

 

Twist and tin/crimp

 

Two-layer strip
Processing Stations Maximum 6 (maximum 3 crimping stations)
Workpiece Length 55 mm – 65 m (2.16” – 213′)
[optional from 35 mm (1.38”)]
Strip Length Side 1: 0.1 – 18 mm (0.004 – 0.71”)
Side 2: 0.1 – 18 mm (0.004 – 0.71”)
[Optional cutter blocks for applications up to
„side 1: 31 mm and side 2: 5 mm“ are available.]
Conductor Cross-Section 0.13 – 6 mm² (26 – 10 AWG)*
Raw Material Diameter Maximum 4.7 mm (0.18″)
Feed Rate Maximum 10 m/s (32.8 ft/s)
Power Supply 3 / N / PE AC 210 500 V; 50 / 60 Hz; 16 A
Compressed Air Connection 6 bar (90 psi), non-oiled, dried and filtered compressed air
Dimensions (L x W x H) 3,363 x 1,428 x ca. 2,155 mm (132” x 54” x 85”) / 2 m base
Height (Safety Cover Opened) approx. 2850 mm (112”)
Weight approx. 440 kg (970 lbs.) incl. base machine and safety cover
approx. 750 kg (1654 lbs.) max. incl. processing stations and options
CE-Conformity All CrimpCenter models complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

* Wires with hard insulations or those that are tightly bonded might not be able to be processed even if they are within the application range stated above. For cross sections smaller than 0.22 mm² (24 AWG) and larger than 4 mm² (12 AWG), sample processing is required.

Processing Stations

  • UniCrimp 221 Crimping station with integrated CFM 20
  • UniCrimp 222 Crimping station with integrated CFM 20 and electronic crimp height control
  • SealLoad 3100 and SLU 3000 Seal loading stations
  • SLD 4100 Double gripper module
  • STW 1100 Twisting station
  • STS 1100 Tinning station

 

Options

  • SmartDetect
  • WireCam
  • Material Change Detection
  • Guided Feasibility Study
  • Two-wire wire straightener unit
  • EASY ProductionServer software
  • Extension conveyors
  • Integrated quality assurance devices
  • PreFeeding systems

Visit here to download.