Schleuniger CoaxStrip 6580

The CoaxStrip 6580 is a fully programmable multi-step stripping machine for coaxial, triaxial, multi-conductor cable and single conductor wire. State-of-the-art electronics, a clear user interface and precision mechanics guarantee repetitive, unmatched Schleuniger stripping quality. Due to the unique 4 blade concept the machine is able to strip thin, tough and slightly out-of-round insulations. The incisions of the blades are linear and perpendicular to the cable axis, resulting in a clean and highly precise cut. In addition, the protective cover can be removed without tools, thus facilitating maintenance of the machine.

The CoaxStrip 6580 is ideal for low volume, quick changeover applications, as well as high volume production, runs, giving the best possible flexibility and productivity to your production methods.

 

  • Precise and powerful
  • Able to strip very thin and tough insulations due to the unique four-blade concept
  • Large processing range
  • Cable diameter verification
  • Barcode scanning function
  • S.ON software
 Programmable processing parameters:
  • Stripping position
  • Incising diameter
  • Centering jaw diameter
  • Incising speed
  • Rotational speed of the stripping head
  • Rotational direction of the stripping head
  • Incising pause
  • Pull-off diameter
  • Stripping lengths (partial strip or full strip)
  • Pull-off speed
  • Pull-off with or without rotation of the stripping head
  • Freely selectable stripping sequence
  • Cable clamping force

Material

  • Cable
  • Coaxial Cable
  • Corrugated Cable
  • Discrete Wire
  • Double Insulated Wire Processing
  • High Speed Data Cable
  • High Voltage Cable
  • Kapton
  • Multi-conductor Cable
  • Polyester
  • Polyurethane
  • PUR
  • PVC
  • Rubber
  • Shielded Cables
  • Silicon
  • Single Conductor Cable
  • Single Wire
  • Solid Wire
  • Stranded Wire
  • Teflon®
  • Tefzel®
  • Triaxial Cable
  • Wire
  • Wire with Special Isolation

 

Processing Capabilities

Coax cable strip
Coaxial cable processing
Conformable cable processing
Discrete wire processing
Discrete wire stripping
Full or partial strip left and right
Full strip
Jacket and inner conductor stripping
Multi-conductor cable processing
Multi-conductor cable stripping
Multi-layer stripping
Multi-step stripping
Power cable processing
Triaxial cable processing
Twisting function
 
Two-layer strip
Raw Material Diameter Minimum 1.5 mm (0.059“)
Maximum 17 mm (0.67“)
Diameter Increments 0.01 mm (0.001“)
Strip Length 100 mm (3.94“)
Strip Length Increment 0.01 mm (0.001”)
Stripping Steps Maximum 6
Clamping Motor driven with programmable clamping force
Cycle Time ≥ 5 s (depending upon cable type and programming)
Production Rate 250 – 550 pcs./h (depending upon cable type and programming)
Memory Capacity 1000 cables
Interfaces 2x USB, 2x Ethernet, 2x SMI (Option)
Noise Level < 70 db (A)
Power Supply 100-240 VAC, 400 VA, 50/60 Hz
Compressed Air Connection 0.4 – 0.6 Mpa / 4-6 bar / 5-12 l/min
Dimensions (L x W x H) 670 x 200 x 333 mm (26.4 x 7.9 x 13.1”)
Weight 28 kg (62 lbs.)
CE-Conformity The CoaxStrip 6580 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

Visit here to download.