Schleuniger CoaxStrip 5200

The CoaxStrip 5200 is a semi-automatic, programmable multi-step stripping machine for coaxial, multi-conductor cable and single conductor wire. The CoaxStrip 5200 can process cables up to 7 mm (0.27″) outer diameter and strip lengths up to 33 mm (1.29″).

 

  • High precision rotary stripping up to 3 steps
  • Menu guided programming with user-friendly color touch panel
  • No mechanical adjustments required when changing wire sizes
  • Very sensitive trigger sensor
  • Operator has clear view of the entire working area
  • Barcode scanning function

Material

Coaxial cable, multi-conductor cable and single conductor wire from 1.1 up to 7 mm (0.04 up to 0.27″) outer diameter and strip lengths from 0.1 up to 33 mm (0.003 up to 1.29″).

Material

  • Cable
  • Coaxial Cable
  • Discrete Wire
  • Multi-conductor Cable
  • Paper / Cardbord
  • PUR
  • PVC
  • Rubber
  • Single Conductor Cable
  • Stranded Wire
  • Teflon®
  • Tefzel®
  • Triaxial Cable
  • Wire

 

Processing Capabilities

Coaxial cable processing
Conformable cable processing
Discrete wire processing
Full strip
Multi-conductor cable processing
Multi-layer stripping
Multi-step stripping
Partial strip
Raw Material Diameter 7 mm (0.276“)
Diameter Increments 0.01 mm (0.001“)
Conductor Cross-Section 0.032 – 6 mm² (32 – 10 AWG)
Strip Length Maximum 33 mm (1.30“)
Strip Length Increment 0.01 mm (0.001”)
Stripping Steps 3
Clamping Motor driven with programmable clamping force
Cycle Time ≥ 4.2 s (depending upon cable type and programming)
Production Rate Maximum 650 pcs./h (depending upon cable type and programming)
Memory Capacity 1,000 cables
Interfaces Foot pedal, USB “Host“
Noise Level  < 70 db (A)
Power Supply 100/115 VAC, 230/240 VAC, 100 VAC, 50/60 Hz
Dimensions (L x W x H) 390 x 130 x 280 mm (15.3 x 5.1 x 11.0”)
Weight 10 kg (22 lbs.)
CE-Conformity The CoaxStrip 5200 complies fully with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

Visit here to download.